PT100/K/E/Cu50 Anticorrosive Thermocouple Right Angle Type

• Customization: Available
• Installation Type: U-Terminal
• Sensing Type: Thermocouple
• Model NO.: PT100/K/E/CU50 Anticorrosive Thermocouple
• Contact: Contactless
• Output Signal Type: Digital Type
• Production Process: Normal Wirewound
• Material: Stainless Steel
• Measuring Medium: Temperature
• IP Rating: IP20
• Certification: CE
• Customized: Accept Customization
• Product Name: Temperature Sensor Thermocouple
• Index Number: K/E/PT100/Cu50
• Probe Size: 7*300*100mm/7*400mm
• Probe Type: Linear/Right Angle Type
• Cable Length: 2m
• Interface Thread: M12*1.5
• Transport Package: Plastic and Carton
• Specification: SUS, resistance wire
• Trademark: LUJINXUN
• Origin: China
• Production Capacity: 5000PCS

Product Description

Specification

Specification Size

1PC PT100/K/E/CU50 Anticorrosive Thermocouple Acid-proof Thermal Resistance Temperature Sensor Right Angle Type Waterproof 2M

Right-angle K type  φ7*300*100
Right-angle E type  φ7*300*100
Right angle PT100  φ7*300*100
Right angle CU50   φ7*300*100

Waterproof joint right-angle K type φ7*300*100
Waterproof joint right-angle E type φ7*300*100
Waterproof joint right angle PT100 φ7*300*100
Waterproof joint right angle CU50   φ7*300*100

K type  φ7*400
E type  φ7*400
PT100 φ7*400
CU50   φ7*400

Waterproof joint k  type  φ7*400
Waterproof joint E  type  φ7*400
Waterproof joint PT100  φ7*400
Waterproof joint CU50    φ7*400

(Accept Customization)
If you want other type probe length,wire length or probe diameter, please check our store or connect Customer Service.

Product Name	Temperature Sensor Thermocouple
Index Number	Type K/E/PT100/CU50
Thread Size	M12*1.5
Probe Diameter	7mm
Probe Length	Right angle type:300*100mm           Rod length:400mm
Cable length	2M
Temperature Measurement Range	K: 0~800℃   E:0~400℃   PT100: -20~450℃  CU50: 0~150℃
Can be Customized	YES

Product Description

Product Introduction

Thermocouple is one of the temperature detection components with a wide range of applications, and its advantages are as follows
1. The temperature measurement is accurate, not affected by the intermediate medium, and it is in direct contact with the object on the north side.
2. The application and temperature control range are very wide.
3. Simple structure and convenient use.

Product Advantage

1.Stainless steel probe, high temperature resistant, suitable for all kinds of bad temperature measuring occasions, has a longer service life and has the advantages of waterproof, oil-proof, acid-proof, corrosion-proof and leakage-proof.

2.The right-angle design (usually 90 bend) can flexibly adapt to the narrow and limited installation space, such as the corner of the pipeline, the inside of the equipment cavity, the side wall of the reaction kettle and other positions where the conventional straight thermocouple is difficult to extend, thus reducing the changes to the equipment structure during installation.

The bend between the probe and the cable is strengthened, which has both rigid support and certain flexibility, which not only ensures the stable contact of the measuring end, but also avoids the fracture caused by structural stress.

3.U-shaped terminal, with firm installation, convenient connection and good transmission effect, red is the positive electrode and blue is the negative electrode.

4.High temperature resistant and high density metal shielded wire, oxidation resistance, anti-interference, accurate temperature measurement and strong information transmission ability.

Product Operate Guide

1. Selection of Thermocouple Type
Choose the appropriate thermocouple type (e.g., K, J, T, S) based on the temperature range of your application. 
2. Installation Preparation
Ensure the thermocouple probe is clean and free of damage (e.g., cracks in the sheath). For accurate readings, position the sensing junction (the tip) directly in the area where temperature needs to be measured—avoid contact with non-target surfaces like walls or pipes, unless measuring surface temperatures.
3. Electrical Connection
Connect the thermocouple wires to a compatible temperature controller, data logger, or meter. Match the positive (usually red) and negative (often blue) leads to the corresponding terminals on the device. Use extension wires of the same thermocouple type to avoid measurement errors from temperature gradients in the connection lines.
4. Operation
Power on the measurement device and allow the thermocouple to stabilize—response time varies by design, but most reach steady readings within seconds. Monitor the display for real-time temperature data. Avoid exposing the thermocouple to excessive vibration, mechanical stress, or corrosive environments beyond its rated limits.
5. Maintenance and Storage
After use, inspect the thermocouple for wear, corrosion, or bending. Clean the probe with a soft cloth or appropriate solvent (avoid abrasive materials). Store in a dry, cool place, coiled loosely to prevent wire damage. Replace the thermocouple if readings become inconsistent or the sheath is compromised.
Follow these steps to ensure reliable, accurate temperature measurements with your thermocouple. Always refer to the manufacturer's specifications for model-specific guidelines.

Product Uses

Thermocouples are widely utilized across various industries due to their exceptional ability to measure temperature in extreme and dynamic environments. In industrial manufacturing, they play a critical role in monitoring and controlling temperatures in furnaces, ensuring accurate readings even in harsh, corrosive atmospheres.
In the energy sector, thermocouples are integral to power plants, both fossil fuel and nuclear. They monitor temperatures in boilers, turbine exhausts, and reactor cores, providing real-time data to prevent overheating and ensure efficient operation. Similarly, in aerospace and automotive industries, they are used to measure temperatures in engine combustion chambers, exhaust systems, and brake components, helping engineers optimize performance and enhance safety.
Beyond heavy industries, thermocouples find applications in research laboratories, where precise temperature control is vital for experiments involving chemical reactions, material testing, or cryogenics. They are also employed in household appliances like ovens and water heaters, as well as in food processing to monitor cooking and refrigeration temperatures, ensuring compliance with safety standards.
Their versatility, fast response time, and wide temperature range make thermocouples an indispensable tool in any scenario requiring reliable temperature measurement.

Packaging & Shipping

Please provide full name,correct post code and valid phone number to avoid any delay of delivery.
We guarantee to ship out within 3-5 working days after payment confirmed.
If there is any unexpected situation,we will contact you as soon as possible.

Company Profile

Machine shop

Dongguan Lujinxun Electric Heating Appliance Co., Ltd.
Located at Shipai-Dongguan, it`s established in 2019. Through the years we have taken the trust from customers from all over the world. Our main products have thermocouple, cartridge heater, immersion heaters, silicone heaters, band heater and heating elements. We have excellent craftsmanship, reliable security, good value and good after-sale service.
Enterprise philosophy: Customer and quality first, product quality is the vitality of an enterprise.

After Sales Service

About Feedback

If you are satisfied with our product and service,Please leave us positive feedback and 5 stars review!
If you are unhappy with service or any other problem,Please contact us before leaving feedback,and we will resolve the issue immediately.
Customer's satisfaction is our goal!